Rejects Bin Chute
Renders
Manufacturing
The purpose of the new chute work is to provide a rejects bin bypass mechanism so that production can continue if there are issues with the under-bin belt feeder. A secondary feature is that in the event of a bin full sensor failure, material is able to discharge from the bin to the overflow chute.
The head chute diverter is a four-sided device that pivots at the top (referred to as a bucket diverter) via external shafts and bearings. The diverter discharges material to the bin or to the existing overflow box.
The bucket diverter is within a sealed enclosure with the external pivot arrangement and actuation mounted on a steel support frame. This provides excellent maintenance access to the bearings and to the actuator. The enclosure provides a physical barrier between people and moving parts, as well as eliminating dust and spillage. Internal access for setting and adjusting overtravel limits is via hatches in the enclosure.
When activated, the diverter discharges to a trouser leg (bypassing the bin), which in turn discharges into the top of the existing overflow chute. The bypass trouser leg penetrates the top of the bin and passes through the exterior wall of the bin. The diverter enclosure support steelwork is bolted to the existing bin steelwork. The actuator mounted on an external steel frame has a seal at the diverter housing penetration location.
Due to direct external contact with rejected material, the chute components within the bin internals are manufactured from stainless steel.